mounting flange การใช้

• This will give you the final position of the mounting flange.
• The chassis plate was similar to the Anzani except for the mounting flanges.
• Plastic is easy to mold into complex shapes that can include an integral mounting flange.
• Position the vent on the peak then fasten it down by driving gasketed roofing nails through the mounting flanges.
• If the difference is small, other factors, such as the diameters of the mounting flanges of the two systems, come into play as well.
• Gardon or Schmidt Boelter gauge showing the instrument main components : metal body, black sensor, water cooling pipe in and out, mounting flange, and cable.
• In this design the module is affixed by a "'single "'diagonally inclined mounting flange, together with a protuberance ( ramp ) on the opposite side.
• Because of an extended flywheel mounting flange on the crankshaft, the AP automatic requires to be fitted to its own unique version of the A-series engine.
• Because the 911 air-cooled crankcase uses the Porsche 356 engine to transmission mounting flange configuration, the 996 GT3 used a manual gearbox also of air-cooled 911 heritage.
• Cross section of a Schmidt Boelter gauge showing the instrument main components : metal body, black sensor, water cooling pipe in and out, mounting flange, and cable.
• The oil pump gear itself can fail around the mounting flange, or, more often, the weak 8.8 ( grade 5 ) grade bolt holding the gear can break.
• Dimensions and design of valve mounting flange and valve attachments are stipulated in the standards EN ISO 5210 for multi-turn actuators or EN ISO 5211 for part-turn actuators.
• The Renault-sourced 1.7 litre engine suffers from a well-known problem where the carburetor mounting flange warps due to engine heat, causing a small air leak and subsequent running problems.
• The forward fuselage ( cockpit ) is constructed of Kevlar, carbon and glass fiber laminate, reinforced by a double skin on the sides with integrated surrounding canopy frame and seat pan mounting flanges.
• The bearing housing height has been increased to improve lubrication; its mounting flange thickness has been substantially increased; the geometry of the top and bottom liners in the bearing housing has been altered to further reduce incidence of rocking.